WE ACCEPT
All repairs should be performed by authorized technicians. This information is provided as a courtesy for our customer.
| Problem | Cause | Solution |
| No flow | Trigger gun valve not opening | Repair or replace gun |
| No water source | Check water supply | |
| Clogged spray nozzle |
Clear or replace nozzle |
|
| Clogged inlet filter | Clean or replace | |
| Faulty unloader | remove and check, repair or replace | |
| Low pressure, adequate flow | Incorrect or no spray nozzle | Replace with smaller nozzle
|
| Worn spray nozzle | Replace with proper size | |
| Unloader improperly adjusted | Adjust properly | |
| Pressure guage inaccurate | Replace pressure guage | |
| Pump packing bad | Replace packing as indicated | |
| Low pressure, low flow | Volume improperly adjusted | If cleaner has volume adjustment check it's setting and adjust |
| Discharge leaks | Look for leaks at discharge side of system |
PAGE 2